CMW Models Clutch/Brake Units – Motor/Speed Reducer-Integrated Type

Specifications

Downloads

CMW Models

[Specifications]

Model	Size	Dynamic friction torque Td [N･m]	Static friction torque Ts［N･m］	Coil(at20℃)				Heat resistance class	Rotating part moment of inertia [kg･m²]	Total work performed until readjustment of the air gap ET[J]	Armature pull-in time ta[s]	Torque build-up time tp［s］	Torque decaying time td［s］
Model	Size	Dynamic friction torque Td [N･m]	Static friction torque Ts［N･m］	Voltage [V]	Wattage [W]	Current [A]	Resistance [Ω]	Heat resistance class	Rotating part moment of inertia [kg･m²]		Armature pull-in time ta[s]	Torque build-up time tp［s］	Torque decaying time td［s］
CMW-06N-H□H	06	5	5.5	DC24	11	0.46	52	B	1.66×10^-4	36×10⁶	C:0.020 / B:0.015	C:0.041 / B:0.033	C:0.020 / B:0.015
CMW-08N-H□H	08	10	11	DC24	15	0.63	38	B	4.78×10^-4	60×10⁶	C:0.023 / B:0.016	C:0.051 / B:0.042	C:0.030 / B:0.025
CMW-10N-H□H	10	20	22	DC24	20	0.83	29	B	1.71×10^-3	130×10⁶	C:0.025 / B:0.018	C:0.063 / B:0.056	C:0.050 / B:0.030
CMW-12N-H□H	12	40	45	DC24	25	1.04	23	B	4.53×10^-3	250×10⁶	C:0.040 / B:0.027	C:0.115 / B:0.090	C:0.065 / B:0.050

※Kinetic friction torque Td values calculated at relative velocity of 100min^-1 min.Depending on the initial torque characteristics, break-in to condition the engaging surfaces may also be required.

Model	Size	Motor output[kW]3-phase 4P	Speed Reducers									Mass[kg]
			Model	Rated output shaft	Speed reduction ratio　1/□						Oil volume[L]
			Model	Rated output shaft	10	20	30	40	50	60	Oil volume[L]
CMW-06N-H□H	06	0.2	N-2SA	Torque［N･m］	78.2	79.9	85.3	78.6	88.9	76.1	0.5	16
CMW-06N-H□H	06	0.2	N-2SA	O.H.L.［N］	1770	2280	2620	2930	3160	3230	0.5	16
CMW-08N-H□H	08	0.4	N-2A	Torque［N･m］	79.8	102	86.9	104	98.5	100	0.5	32
CMW-08N-H□H	08	0.4	N-2A	O.H.L.［N］	1760	2240	2630	2880	3140	3230	0.5	32
CMW-10N-H□H	10	0.75	N-3A	Torque［N･m］	165	180	180	188	187	164	1.0	44
CMW-10N-H□H	10	0.75	N-3A	O.H.L.［N］	2250	2900	3370	3720	4040	4370	1.0	44
CMW-12N-H□H	12	1.5	N-4A	Torque［N･m］	292	293	301	302	－	－	2.0	72
CMW-12N-H□H	12	1.5	N-4A	O.H.L.［N］	2780	3640	4210	4680	－	－	2.0	72

※The induction motors are fully sealed external fan motors that conform to the JIS C4210 standard (for 0.2 kW and 0.4 kW models) or the JIS C 4213 standard (for 0.75 kW models or higher).

※The power supplies for the motors are 3-phase, 200 V AC at 50 Hz, or 200/220 V AC at 60 Hz.

※If you desire a special voltage (5 Power Supply Specifications), different number of poles, or the like for the induction motor, contact Miki Pulley.

※Speed reducer is made by Hirai Reduction Gear Manufacturing Co.

[Dimensions]

Model	Dimensions of part																			Dimensions of shaft
Model	A1	A2	B1	B2	C1	C2	D1	D2	E	F	G	H	J	K	KL	L	M	N	Z	Q	S	U	W
CMW-06N-H□H	105	105	132	157	75	135	160	130	110	86	15	215	375	117	－	492	205	170	12	50	25	28	8
CMW-08N-H□H	115	112	140	165	82	146	160	145	110	100	15	226	412	135	124	547	225	187	11	50	25	28	8
CMW-10N-H□H	125	146	155	200	102	184	200	163	120	125	16	284	477	159	131	624	255	222	12	65	30	33	8
CMW-12N-H□H	150	168	186	245	118	213	210	180	150	150	20	318	541	185	145	714	286	255	14	75	35	38	10